public:print:myq

This is an old revision of the document!


MyQ - printing, scanning and copying system

  • Service scope - KYOCERA Multifunction devices are available for staff, researchers, faculty and students.
  • Unification - ALL devices are accessible via unified control system called MyQ (includes printing spooler).
  • Identity - Only users with network account can use it (scan, print, copy). These activities are always bound to individual username.
  • Identification - For identification use your ID card (self registered), network account or PIN.
    • If you have ID card issued by Charles University, use this one preferably.
    • If you have only anonymous entrance ID card (red color), you can use any ID card, which KYOCERA printer can recognize (e.g., OpenCard, Lítačka, library ID card etc…).
    • If you do not have any suitable ID card or RFID token, you can get your individual PIN code via
      https://myq.cerge-ei.cz/en/ (log with your network username, click “Generate PIN” button at the “Home” tab)
    • You can also always log in with your network username and password.
  • ID card registration - Each user registers (assigns) individually his/her ID card via KYOCERA display control panel (to pair ID card with an account)
  • Billing - Student's should be aware, that printing and copying activities are billed regularly (usually on monthly basis).
  • Printer driver - You need to have proper driver installed to be able to use MyQ / KYOCERA printers.
  • Pick your printing - After you send print job to MyQ printer (spooler), you can print it at any of KYOCERA printers, just identify yourself with your ID card or PIN.

You may scan documents after you log in.

Please note, that maximal size of attachmant must be smaller tha 10 MB.
Each scanned page is about 400 k Bytes in case of standard PDF scan.
If you have intention to scan more than about 20 pages, please select Compact PDF variant.

  • Identify yourself at the printer's panel (ID card, PIN, network account)
  • tap “Panel Scan” square icon on the display
  • Select email target - tap “Destination” tab. You may either:
    • Send scan to your cerge-ei.cz mailbox:
      • Select “MyQ”as an email target
    • Send scan to another email address:
      • tap “Email Addr Entry” button on the display
      • Enter an email address to which you want to send scanned document, tap “OK”
  • tap “Quick Setup”, “Color/Image Quality” tab to optionally specify further options of scan
  • SCAN your document (it will be sent to the specified email address after the scan is finished)

Access to MyQ management is available only from local LAN

  • Go to the address https://myq.cerge-ei.cz/en/ (this internal site operates without certificate currently, so you must confirm security exception to bypass the message about connection's privacy)
    (if browser rejects page, try anonymous mode or try address: https://myq.ad.cerge-ei.cz/en or just https://myq/en or try another browser and agree to add browser's security exception)

Access to your printing queue is available only from local LAN

  • Login to MyQ management with your network Username and Password or PIN
  • Go to the tab Jobs - you can manage jobs there (delete, pause, …)
  • Log to MyQ management with your network username,
  • click “Generate PIN” button at the “Home” tab
  • your PIN code will be shown on screen

IT regularly replaces empty toners after they are automatically informed by the printing system. You may also send an information to the IT helpdesk.

What to do: Use another KYOCERA printer. All printers are connected to the same printing spooler.

It's NORMAL state and no service activity is necessary at this stage. Printer just warns that waste box will be full in near future. It is not technically possible (it is blocked by printer) to replace waste box before it is completely full.

IT helpdesk is automatically informed about this state by printing management system.

What to do: Just ignore the message. There is nothing to do.

It is necessary to replace it with an empty waste box. IT helpdesk is automatically informed by the printing system. You may also send an information to the IT helpdesk.

What to do: Use another KYOCERA printer. All printers are connected to the same printing spooler. (You may also inform IT helpdesk, but the state is usually known thanks to automatic reporting)

What to do: Follow the instructions at the printer's display. This kind of printers are well designed to help users to solve paper jam issues.

What NOT to do: Leave the device in the non-functional state…

  • /var/www/html/dokuwiki/data/attic/public/print/myq.1583394634.txt.gz
  • Last modified: 2020-03-05 07:50
  • by vesely